The Installation and Design Difficulties of Dental Stool

Ⅰ. The installation method of the dental stool

The dental comprehensive treatment stool is a necessary medical equipment for stomatologists. Since the first electric drill came out in 1887, the performance and intelligence of the dental treatment machine have been greatly improved.

In recent years, the application of a large number of new technologies makes dental equipment more user-friendly. Dental stools are pneumatic and electric.

Gas, water and electricity are the three essential elements of the dental comprehensive treatment stool, so before installation, the pipeline of gas and water must be well arranged (as far as possible from underground), and the first water filter should be installed in the waterway, so as not to affect the life of the water filter element in the machine.

The air pump should not be too close to the treatment stool, so as not to affect the treatment of patients with the noise when pumping. If there are more equipment, it is recommended to adopt central gas supply, which can not only save costs and reduce failures, but also ensure the quality of gas supply.

Usually the newly purchased equipment is installed and adjusted by the dental chair company, but the installation process should be in the presence of a doctor as far as possible, so that problems in the future work can be solved as far as possible.

Comprehensive dental treatment stool has the connected and the split, with the majority of the connected, which is composed by patient chair, doctor, nurse, foot, operating lamp, side box and floor box.

The patient chair has electric and artificial control, and electric power has the screw drive, electric hydraulic and belt drive. Artificial control mainly uses oil pressure to control the dental stool position.

Ⅱ. Difficulties in dental stool design

Are you afraid of going to the dentist as a child? Actually, dentists aren't so scary. Dentists will use the dental stool when they check. Although the dental stool looks very simple, in fact, the design of the dental stool also has difficulties. What are the specific difficulties?

Dental stool is mainly used for oral surgery and oral disease inspection and treatment. The main structure is divided into 8 parts. The whole machine and bottom plate are fixed on the ground, and the bottom plate is connected with the upper part of the dental stool through the bracket. The action of the dental stool is controlled by the control switch on the back of the chair.

Its working principle is that the control switch starts the motor operation and drives the transmission mechanism to work, so that the corresponding parts of the dental stool move. According to the needs of treatment, the control button can be manipulated to complete the lifting, lowering, bending, leaning and repositioning of the dental stool.

Difficulties in dental stool design: In terms of hygiene and environmental protection: According to epidemiological data, there is a serious problem of cross infection in oral diagnosis and treatment in China.

The HBV infection rate of dentists was 3-6 times higher than that of the general population. The HBV positive rate of dentists was 25.8%, and the total positive rate of HBV contamination of dental mobile phones was 62%. Therefore, the prevention of cross-infection is an important factor to be considered in the design of dental stools.

The design purpose of dental stool is mainly convenient, comfortable, safe, and so on, and high-grade chair generally has a variety of personalized operation procedures, which can rely on the personality habit of doctors, setting different treatment positions. To learn more about dental chairs, please keep following our website!